Exit Inspection-Brick Veneer

BRICK VENEER

Exit Inspection

Project

Builder

Inspection date

Checklist

Mortar joints do not exceed 1/2 inch.

Yes/Pass/True No/Fail/False NA See Notes

All brick veneer is secured to solid framing, not sheeting.

Yes/Pass/True No/Fail/False NA See Notes

There are no broken or cracked bricks in the walls.

Yes/Pass/True No/Fail/False NA See Notes

Brick veneer is level and straight with no more than a 1/4-inch deviation in 20 feet.

Yes/Pass/True No/Fail/False NA See Notes

Brick veneer is supported by appropriate platform or steel angle attached to wood framing.

Yes/Pass/True No/Fail/False NA See Notes

There is a minimum 1 inch (nominal) air space behind the brick veneer.

Yes/Pass/True No/Fail/False NA See Notes

Flashing is extended a minimum of 8 inches vertically.

Yes/Pass/True No/Fail/False NA See Notes

Where flashing is discontinuous, dams have been formed by turning ends up at least 1 inch into a head joint.

Yes/Pass/True No/Fail/False NA See Notes

Open head joint weeps are installed at a maximum of 24 inches on center.

Yes/Pass/True No/Fail/False NA See Notes

Space wicks or weep tubes are installed at a maximum of 16 inches on center.

Yes/Pass/True No/Fail/False NA See Notes

Anchors are spaced no more than 32 inches on center horizontally.

Yes/Pass/True No/Fail/False NA See Notes

Anchors are spaced no more than 24 inches vertically.

Yes/Pass/True No/Fail/False NA See Notes

Anchors around openings larger than 16 inches are within 12 inches of the opening, with a maximum vertical spacing of 36" on center.

Yes/Pass/True No/Fail/False NA See Notes

Brick or brick veneer has been installed under the thresholds of all doors which are surrounded by brick.

Yes/Pass/True No/Fail/False NA See Notes

Site is clean and free of debris.

Yes/Pass/True No/Fail/False NA See Notes

Excess material is stacked at front of lot.

Yes/Pass/True No/Fail/False NA See Notes

Send to

Builder representative

Builder email

Copy to (optional)

Subcontractor

Subcontractor representative

Subcontractor email (optional)

When the “Send Inspection Report” button is selected, an email with all the information in this Inspection Report will be sent to the “Builder email” address of the Company Representative completing this report and to the “Subcontractor email” address and “Copy to” addresses if provided.

BRICK VENEER

Exit Inspection

Brick Wall Assembly

Brick Wall Assembly 2

Brick Water Management

Checklist

Send to